Ergonomically designed \"ball grip\" handle screwdriver with #1 Phillips JIS tip and 3-inch (75mm) shaft. Fits comfortably in the palm of your hand. Features a cushion grip, hardened chrome steel shank, high-precision black point, and magnetized tip. Overall length is 6-1/4-inches (155mm).\r\n

Ergonomically designed ball grip handle screwdriver with #2 Phillips JIS tip and 4-inch (100mm) shaft. Fits comfortably in the palm of your hand. Features a cushion grip, hardened chrome steel shank, high-precision black point, and magnetized tip. Overall length is 8-7/8-inches (200mm).

Balldriver screwdriver, phillips (2 x 150MM)

Ergonomically designed ball grip handle screwdriver with #2 Phillips JIS tip and 7-7/8-inch (200mm) shaft. Fits comfortably in the palm of your hand. Features a cushion grip, hardened chrome steel shank, high-precision black point, and magnetized tip. Overall length is 11-3/4-inches (300mm).

Ergonomically designed \"ball grip\" handle slotted screwdriver with ¼-inch (5.5mm) tip and 4-inch (100mm) shaft. Fits comfortably in the palm of your hand. Features a cushion grip, hardened chrome steel shank, high-precision black point, and magnetized tip. Overall length\r\nis 8-7/8-inches (200mm).

Ergonomically designed \"ball grip\" handle screwdriver with #1 Phillips JIS tip and 6-inch (150mm) shaft. Fits comfortably in the palm of your hand. Features a cushion grip, hardened chrome steel shank, high-precision black point, and magnetized tip. Overall length is 9-inches (230mm).

Cleaning sheet\r\n\r\n(Package of 10)

Discontinued\n\nUse part number BO10946

Needle file set, 5 pieces

C-clip setter/detacher, 8.5-inch

Steel springhook with pull end. 6-7/8-inches (177mm) long.\r\n\r\n

Steel springhook with double-ended design. Pull springhook on one end and push springhook on the opposite end. 7-inches long.

Plastic pencil type spudger tapered to a point on one end and screwdriver tip on other end. Quantity of 5 per package. 6-inches (150mm) long.

Heavy-duty, general-purpose electrician scissors with two notches for 19 and 23 AWG wire. Scraper and file on back edge of blade. 5-inches (125mm) long.

Straight locking hemostat, 5.5 inches

Curved locking hemostat, 5.5 inches

Discontinued\n\nUse part number XHT-412

Magnifier loupe, 8X\r\n

K-1 light duty blade, 5 pk

Chrome mini metric open-end wrench set. Includes 5.5, 6, 7, 8, 9, 10, and 11mm wrenches and plastic case.

Balldriver tip, hex key L-wrench set with 6 pieces. Color coded case. Ball-end can be inserted in screw at angles up to 25 degrees without binding. Set includes: 1.5mm - 5.0mm

Precision #0 Phillips screwdriver. Easy spin finger control cap. Hardened steel shaft and tip with chromed finish. 2-inch (50mm) blade with overall length of 5-3/4-inches (145mm). Ideal for working on electronic components.

Ball end precision hex steel 1.5mm screwdriver. Blade length is 2-inches (50mm) with exact fit tip that works at up to a 30 degree angle. Anti-corrosion satin vapor chromed tip. Free turning precision finger controlled control cap. Overall tool length is 5.75-inches (145mm).

Precision #5 TORX screwdriver. Easy spin finger control cap. Hardened steel shaft and tip with chromed finish. 1-1/2-inch (40mm) blade with overall length of 4-3/4-inches (115mm).

Anti-static ESD safe precision TORX #IP4 tip screwdriver. Hardened steel shaft with chromed finish. Easy spin finger control cap. 1-1/2-inch (40mm) blade with overall length of 4-3/4-inches (120mm). Ideal for working on electronic components.

Slotted drive lock, interchangable bit, sys 6\r\n

Double ended Phillips #1 and Phillips #2 blade. 6-inches (150mm) long\r\nFor use with WIHA Drive Lock Handle (see part # BO28150)\r\n

Double-ended TORX T6S and T8S tamper proof blade. 6-inches (150mm) long. For use with WIHA Drive Lock Handle (see part # BO28150)

Double ended TORX tamper-proof security blade, T7S/T9S. 6-inches (150mm) long For use with WIHA Drive Lock Handle (see part # BO28150)

Double ended TORX tamper-proof security blade, T10S/T15S. 6-inches (150mm) long For use with WIHA Drive Lock Handle (see part # BO28150)

Double ended TORX tamper-proof security blade, T20S/T25S. 6-inches (150mm) long For use with WIHA Drive Lock Handle (see part # BO28150).

Double ended TORX tamper-proof security blade, T30S/T40S. 6-inches (150mm) long For use with WIHA Drive Lock Handle (see part # BO28150).

Double ended hex metric blade, 2.0mm/2.5mm. 6-inches (150mm) long For use with WIHA Drive Lock Handle (see part # BO28150).

Double ended hex metric blade, 3.0mm/4.0mm. 6-inches (150mm) long For use with WIHA Drive Lock Handle (see part # BO28150).

Nut driver blade, 10.0MM . 6-inches (150mm) long. For use with WIHA Drive Lock Handle (see part # BO28150)

Drive Lock handle (for WIHA Drive Lock blades) Soft Finish Handle, 115mm

7 piece metric nutdriver set

Instantly magnetize/demagnetize steel tools and small parts. Works with items over 1.3-inch in length and 1/8-inch diameter. Uses powerful C8 permanent industrial ceramic magnets.

Tamper resistant TORX bit set in pocket-sized box. Slide out drawer keeps bits organized. Included bit sizes are T7s, T8s, T9s, T10s, T15s, T20s, and T25s.

Eight ounce bottle with sprayer

Carriage height tool

Discontinued

Adjustable, locking \"vice grip\" pliers. Curved, hardened steel serrated jaws. 5-inches long (125mm)\r\n

Adjustable, locking \"vice grip\" long nose pliers. Curved, hardened steel 1.75- inch (45mm) long serrated jaws. Pliers are 6-inches long (125mm).\r\n

Chrome adjustable wrench with extra-wide opening up to 7/8-inch (22mm). Smooth slot to move worm screw for adjustment. Deeper jaws provide greater fastener contact. 6-inches long (152mm).

Adjustable, 6-position, 5-inch long tongue and groove pliers. Precision machined jaw teeth prevent slippage.

Adjustable, 6-position, 7-inch long tongue and groove pliers. Precision machined jaw teeth prevent slippage.

5.5MM nut driver, 5 inch magnetic shaft

5.5MM nut driver, 10-Inch magnetic shaft

Alkaline AA battery

Extech mini-digital multi-meter and voltage detector. 0.5% accuracy,\r\n100 - 600VAC non-contact voltage measurement, manual ranging, auto power off, and low battery indicator.\r\n

Nickle plated, Boley style tweezer. Straight with sharp point. 4.5-inch (115mm) long.

Extendable digital multi-meter test leads, 56-inch\r\n

Flexible 6-inch steel rule. Metric (mm) and English (1/16-inch) increments. \r\n

Discontinued\n\nUse part number BO40010

Offset rachet screwdriver with ¼-inch slotted and #2 Phillips bits. Used for reaching ard-to-get-at screws, especially where leverage is required. Features two-position (forward and reverse) ratchet. Blades are made of hardened tool steel for maximum durability. Overall length is 4-inches.

Pocket level with magnetic pickup tip. 5-inches long\r\n

Bulls eye level

Brass brush with ½-inch (15mm) bristles and 7-inch handle.\r\n

Discontinued\n\nUse part number KH1140

Deluxe 7\" alignment tool

Integrated circuit extractor tool, spring steel

Tuner aligner tool

Mini pot trim adjustment tool

Jewelers screwdriver set. Nickel plated handle with screw chuck. Six piece set includes three tempered 0.100, 0.070 and 0.040 straight and #0 Phillips blade sizes plus one scratch awl in a fitted vinyl case. \r\n

30-watt soldering iron develops 800 degree F tip temperature. Heat and impact resistant handle with stainless steel barrel. Includes barrel cap. Overall length is 8.75-inches. 5-foot power cord.

Bulb-style manual blower with brush attachment.\r\n

HP toolkit for DesignJet, OfficeJet, and DeskJet repair

Stat gard ESD device

Discontinued\n\nUse part number TSA2012

IBM-style springhook with double-ended design. Pull springhook on one end and fork-type pusher on the opposite end. Knurled body. 8.25-inches long.

External tip, straight nose, retaining ring pliers. Pliers are hardened forged tool steel with vinyl grips. Fits rings from 1/8 - 3/8 inches (3 - 10mm).\r\n

Long nose pliers, with 2-inch nose. Serrated jaws for solid gripping and silicone handle grips. 5-inches long (125mm).

Convertible, external tip, straight nose, retaining ring pliers. Pliers have vinyl handle grips. Fits rings from 3/8 - 3 inches (8 - 82mm).\r\n

ECCP-412G M1E

Syringe 30CC with lure connectors, 10pk

Slotted screwdriver bit, 3/16-inch\r\n

Magnetic 4-in 1 screwdriver with four bits. Two slotted bits, #2 Phillips bit, \r\n#1 Phillips bit. 3-inch overall length (75mm). \r\n

Magnetic 4-in-1 screwdriver with four bits. Two slotted bits, #2 Phillips bit, #1 Phillips bit. 8-inch overall length (175mm).\r\n

Mini flashlight

6\" round smooth file

Portasol soldering tool

INX P.K. plastic cleaner, 32 ounce\n\n(Must ship via Ground)

Pallet platt sewn bottom model H

Plano 3450-6 pocket stowaway

Discontinued\n\nUse part number PLA3450-6

Gas burner pliers. Ideal for stripped or frozen screw and bolt removal. Bi-directional, hardened, serrated jaws. Silicone handle grips. 6-inches long (150mm).

Springhook pull

Advanced copier tool kit with soft sided case

Captive springhook holds springs or wires for installation or removal in hard to reach spaces. Spring loaded, push handle to extend hook, release, and hook retracts. Knurled grip, vinyl handle. 6.875-inches long.

Feeler gauge set with Metric equivalent

Slip joint, lock grip pliers. 6-inches long

Large, oval dust brush with 10-inch handle and 2.5-inch bristles.\r\n

Wire stripper and cutter. Dial adjustment cuts and strips solid and stranded wire. Strips 12 - 26 gage wire. Vinyl handles, spring action.

Steel, extra-long (11-inch) pull springhook.\r\n

Steel, extra-long (11-inch) push springhook.

Pocket tele mag pick-up tool

Flexible claw pickup tool, 23.6\"

Telescopic, swiveling circular inspection mirror . Telescopes 4.5 - 19 inches.

5\" shears

Diagonal cutting pliers with low wear lap joint, riveted and able to withstand high levels of load. Low force cutting action, clean cutting. Long life edge is achieved through additional induction hardening For soft and medium hard wire. Soft vinyl grips. 5.3-inches (135mm) long.\r\n

Diagonal cutting pliers with low wear lap joint, riveted and able to withstand high levels of load. Low force cutting action, clean cutting. Long life edge is achieved through additional induction hardening For soft and medium hard wire. Soft vinyl grips. 6.3-inches (160mm) long.\r\n

Diagonal cutting pliers forged from high quality alloy steel. Forged cutters` edges are machine ground and electronically hardened for extended life. Handle coil springs allow faster action with reduced user fatigue. 4-inches long.

Crevice tool brush\r\n

Four inch round dusting brush

Crevice nozzle, eight and one-half inches long

Needle nose nozzle

Filter plug

Forensics vacuum filter

Vacuum cleaner, basic model\r\n\r\n(110 volt)

HEPA vacuum cleaner\r\n\r\n(110 volt)

Vacuum cleaner\r\n\r\n(220 volts)

Forensics vacuum cleaner

Electronic vacuum cleaner\r\n\r\n(Retail packaging)

Electronic vacuum cleaner

Weller tip 1/8 cone SP23

Phillips screwdriver with soft cushion grip and 2.5-inch shaft. Phillips #0 JIS tip is ideal for repairing office machines. Overall length 6.5-inches (165mm).

Phillips screwdriver with soft cushion grip and 3-inch shaft. Phillips #1 JIS tip is ideal for repairing office machines. Overall length 7-inches (180mm).

WRSD108

Discontinued

Slotted screwdriver with soft cushion grip. Slotted ¼-inch blade with 4-inch shaft. Overall length 8.75-inches (215mm).\r\n

Wera Kraftform Plus 335 laser tip slotted screwdriver. Tip width: 3.5mm. Tip thickness: 0.6mm. Blade length: 125mm (5\")

Slotted screwdriver with soft cushion grip. Slotted 1/8-inch blade with 8-inch shaft. Overall length 12.75-inches (325mm).\r\n

Phillips screwdriver with soft cushion grip and 4-inch shaft. Phillips #2 JIS tip is ideal for repairing office machines. Overall length 8.75-inches (215mm).\r\n

Phillips screwdriver with soft cushion grip and 8-inch shaft. Phillips #2 JIS tip is ideal for repairing office machines. Overall length 12.75-inches (325mm).\r\n

Phillips screwdriver with soft cushion grip and 10-inch shaft. Phillips #2 JIS tip is ideal for repairing office machines. Overall length 14.75-inches (365mm).\r\n

Slotted screwdriver with soft cushion grip. Slotted 3/16-inch blade with 6-inch shaft. Overall length 10.75-inches (275mm).\r\n

3/16\" screwdriver with 8\" blade

25-watt soldering iron develops 750 degree F 1/8-inch tip temperature. Indicator light shows when iron is on. Heat and impact resistant handle with stainless steel barrel. 5-foot power cord and iron support stand included.

#2 blade, 5 pack knife dispenser

Phillips #0 tip screwdriver

Slotted screwdriver with pocket clip.

Slotted screwdriver with pocket clip. Slotted 1/8-inch blade with 3-inch shaft.\r\nOverall length 5.25-inches (135mm).\r\n

Seventeen (17) pockets lighted handle roller bag

Tackle bag

Solar panel charger